Lenovo ThinkSystem SR635 V3 User Manual page 132

1. Loosen the four screws on the LACM shipping tray.
2. Grasp the middle of the module handle (LACM heat sink bracket) and one T20 screw
fastening the radiator to lift the LACM to separate the module from the shipping tray.
Step 4. Make sure you have an alcohol cleaning pad available.
Attention: If there is any old thermal grease on the processors, gently clean the top of the
processors with an alcohol cleaning pad.
Step 5. Install the LACM to the system board assembly.
ThinkSystem SR635 V3 User Guide
122