Lenovo ThinkSystem SR635 V3 User Manual page 265

• For the locations of connectors on the processor board, refer to
page 33.
• To connect power cables for 2.5-inch drive backplanes, refer to
244.
• To connect power and input cables for CFF RAID/HBA adapters, refer to
page 222.
• To connect power and sideband cables for the rear drive backplane, refer to
backplane" on page 232.
• To connect power and sideband cables for the 7mm drive backplane, refer to
page 235.
• To connect cables for RAID flash power modules, refer to
To connect signal cables for a backplane for 4 x 2.5'' AnyBay front drives, refer to the following cable routing
scenarios depending on your server configuration:
• "Cable routing with an SFF HBA/RAID adapter" on page 255
Cable routing with an SFF HBA/RAID adapter
The following illustrations and tables show the mapping relationship between backplane connectors and an
8i SFF RAID adapter (Gen 3 or Gen 4).
"System-board-assembly connectors" on
"Power/Sideband cable routing" on page
"CFF RAID/HBA adapter" on
"Rear NVMe/SATA drive
"7mm drive backplane" on
"RAID flash power modules" on page
.
Chapter 6
227.
Internal cable routing
255