Lenovo ThinkSystem SR635 V3 User Manual page 217

Hide thumbs Also See for ThinkSystem SR635 V3:
Table of Contents

Advertisement

"Install a riser card" on page 181
"Install the OCP module" on page 139
"Backplane replacement" on page 60
2. Reconnect all the required cables to the same connectors on the system board assembly. See
6 "Internal cable routing" on page
3. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside the server.
4. Reinstall the top cover. See
5. If the sever was installed in a rack, reinstall the server into the rack. See
page
94.
6. Reconnect the power cords and any cables that you removed.
7. Power on the server and any peripheral devices. See
8. If the processor board is replaced, update the vital product data (VPD). See
Data (VPD)" on page
Machine type number and serial number can be found on the ID label, see
access the Lenovo XClarity Controller" on page
9. Download and install the latest device drivers:
thinksystem/sr635v3/7d9h//downloads/driver-list/
10. Update the system and device firmware. See
Note: (Lenovo Trained technicians only) If you have replaced the firmware and RoT security module,
update the firmware to the specific version supported by the server. See
RoT Security Module
11. If hiding TPM firmware is needed, see
12. Optionally, enable UEFI Secure Boot. See
Update the Vital Product Data (VPD)
Use this topic to update the Vital Product Data (VPD).
• (Required) Machine type
• (Required) Serial number
• (Optional) Asset tag
• (Optional) UUID
Recommended tools:
• Lenovo XClarity Provisioning Manager
• Lenovo XClarity Essentials OneCLI commands
Using Lenovo XClarity Provisioning Manager
Steps:
1. Start the server and press the key according to the on-screen instructions. The Lenovo XClarity
Provisioning Manager interface is displayed by default.
2. Choose System Summary. The "System Summary" tab page is displayed.
3. Click Update VPD, then, follow on-screen instructions to update the VPD.
217.
"Install the top cover" on page
207.
.
"Hide/observe TPM" on page
"Enable UEFI Secure Boot" on page
213.
"Power on the server" on page
41.
https://datacentersupport.lenovo.com/products/servers/
.
Update the
firmware.
197.
.
Chapter 5
"Install the server to rack" on
59.
"Update the Vital Product
"Identify the server and
Tip for replacing a Firmware and
198.
Hardware replacement procedures
Chapter
207

Advertisement

Table of Contents
loading

This manual is also suitable for:

7d9g7d9h

Table of Contents