Lenovo ThinkSystem SR635 V3 User Manual page 119

• Read "Installation Guidelines" on page 45
work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Procedure
Step 1. Touch the static-protective package that contains the hot-swap power supply to any unpainted
surface on the outside of the server. And then, take the hot-swap power supply out of the package
and place it on a static-protective surface.
Step 2. If there is a power-supply filler installed, remove it.
Figure 68. Hot-swap power supply filler removal
Step 3. Slide the new hot-swap power supply into the bay until it snaps into position.
Figure 69. Hot-swap power supply installation
and "Safety inspection checklist" on page 46
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
.
Chapter 5 Hardware replacement procedures
to ensure that you
109