Lenovo ThinkSystem SR635 V3 User Manual page 285

Cable routing with a CFF RAID/HBA adapter and 2x 2.5 rear SAS/SATA drives
Note: Gen 3 and Gen 4 16i CFF RAID/HBA adapters are slightly different in their connector locations, but the
connection method is similar. The following illustration takes Gen 4 16i CFF RAID/HBA adapters as an
example.
Figure 205. Cable routing for 6 front SAS/SATA drives and 4 front AnyBay drives bays and a 16i CFF RAID adapter (Gen
3/ Gen 4) with 2 x 2.5 rear SAS/SATA drives installed
Table 46. Mapping between one front AnyBay backplane and a 16i CFF RAID adapter (Gen 3) with 2 x 2.5 rear SAS/SATA
drives installed
From
SAS 0 on the front backplane
1
SAS 1 on the front backplane
2
To
C0 on the CFF RAID/HBA adapter
1
C1 on the CFF RAID/HBA adapter
2
Chapter 6
.
Internal cable routing
275