• To connect power cables for 2.5-inch drive backplanes, refer to
244.
• To connect power and input cables for CFF RAID/HBA adapters, refer to
page
222.
• To connect power and sideband cables for the rear drive backplane, refer to
backplane" on page
232.
• To connect power and sideband cables for the 7mm drive backplane, refer to
page
235.
• To connect cables for RAID flash power modules, refer to
To connect signal cables for 4 x 2.5-inch SAS/SATA configuration, refer to the following cable routing
scenarios depending on your server configuration:
•
"Cable routing for onboard configuration" on page 249
•
"Cable routing with an SFF HBA/RAID adapter" on page 250
ThinkSystem SR635 V3 User Guide
248
"Power/Sideband cable routing" on page
"CFF RAID/HBA adapter" on
"Rear NVMe/SATA drive
"7mm drive backplane" on
"RAID flash power modules" on page
227.