Figure 199. Cable routing for SATA onboard configuration of 6 front SAS/SATA drives and 4 front AnyBay drive bays
Table 40. Mapping between one front AnyBay backplane and system board assembly for SAS/SATA onboard
configuration
From
SAS 0, SAS 1 on the front backplane
1
SAS 2 on the front backplane
2
Cable routing with an SFF HBA/RAID adapter
The following tables show the mapping relationship between backplane connectors and a 16i SFF HBA/RAID
adapter (Gen 3 or Gen 4).
To
PCIe connector 7 on the system board assembly
1
PCIe connector 8 on the processor board
2
Chapter 6
.
Internal cable routing
269