To Connect The Space Cooling/Heating On/Off Output - Daikin EBLA04E2V3 Installer's Reference Manual

9.2.10 To connect the space cooling/heating ON/OFF output

EBLA04~08E2V3+E23V3 + EDLA04~08E2V3+E23V3
Daikin Altherma 3 M
4P685228-1A – 2022.05
2 1
X2M 7 9
A4P Y1 YC
180°
a Installation of EKRP1HBAA is required.
WARNING
Stripped wire. Make sure that stripped wire cannot make contact with possible
water on the bottom plate.
3 Fix the cable with cable ties to the cable tie mountings.
INFORMATION
Cooling is only applicable in case of reversible models.
Wires: (2+1)×0.75 mm²
Maximum load: 0.3 A, 250 V AC
—
1 Access the electrical connections. See
to the outdoor unit" [
2 Connect the space cooling/heating ON/OFF output cable to the appropriate
terminals as shown in the illustration below.
1+2 Wires connected to the alarm output
3 Wire between X2M and A4P
A4P Installation of EKRP1HBAA is
required.
3
A4P.Y1
X2M.7
X2M
7 9
a
A4P
X1M
YC Y1
X2M.9
"9.2.1 To connect the electrical wiring
4
95].
9 Electrical installation
|
YC Y1
Installer reference guide
113