Added Support For Rmio64-D (Nuage Workgroup Manager) - Yamaha NUAGE FADER Ncs500-FD Operation Manual

Added Support for RMio64-D
(NUAGE Workgroup Manager)
You can now control the RMio64-D Dante/MADI
conversion audio interface remotely from NUAGE
Workgroup Manager.
NOTE
• For remote control operation, the target RMio64-D must be
active in NUAGE Workgroup.
• Modifications to parameters are applied to the RMio64-D unit
as soon as they are changed.
• A total of eight Nuage I/O and RMio64-D units can be
registered in a Workgroup.
RMio64-D – Property Window
1
2
3
4
5
6
7
9
The parameters that can be controlled are as follows:
Version
1
Displays the firmware version of the RMio64-D unit. You
can update the firmware by clicking "Update."
Word Clock Source
2
Enables you to select the word clock source for the
RMio64-D (from Dante/WCLK IN/MADI).
SRC
3
Enables you to turn MADI SRC (Sampling Rate Converter)
on/off.
Input Clock Source
4
Enables you to select the word clock source for SRC input
(from MADI/WCLK IN for SRC).
Output Clock Source
5
Enables you to select the MADI output signal when SRC is
on as the word clock source.
Same as Input
Clock Source
Same as Word
Clock Source
Input Rate
6
Enables you to select from 1Fs (1x)/2Fs (2x)/4Fs (4x)
according to the MADI input frequency. For example, if the
MADI input signal is 192 kHz (4x 48 kHz), select "4Fs."
7 MADI Output Frame
Enables you to select the frame frequency for the MADI
output signal. It is possible for the selected value to differ
from the actual frequency. For example, when the setting
is "96kHz" and the actual frequency is "48kHz," for
example, "96kHz >> 48kHz" is displayed.
Same as Input
48kHz
96kHz
8 MADI Output Channel
Enables you to select the number of channels for the
MADI output signal. It is possible for the selected value to
differ from the actual number of channels. When the
setting is "64" and the actual number of channels is "56,"
8 for example, "64 >> 56" is displayed.
Same as Input
64
56
9 Panel Lock
Unlocks/locks panel operation for the RMio64-D unit.
MADI Output Signal when SRC is On
Input Clock
Source
MADI
MADI
WCLK IN for SRC
WCLK IN for SRC
Syncs the MADI output signal with the
MADI input signal.
Syncs the MADI output signal with the
RMio64-D clock.
Outputs the same frame frequency as the
MADI input signal.
Outputs at 44.1 kHz or 48 kHz.
Outputs at 88.2 kHz or 96 kHz.
Outputs the same number of channels as
the MADI input signal.
Outputs on 64 channels.
Outputs on 56 channels.
Output Clock MADI Output
Source Signal
Same as Input Synced with MADI
Clock Source Input Signal
Same as Word Synced with
Clock Source RMio64-D clock
Same as Input Synced with word
Clock Source clock input from
WCLK IN for SRC
Same as Word Synced with
Clock Source RMio64-D clock
Added functions in NUAGE V1.6 67