Yamaha NUAGE FADER Ncs500-FD Operation Manual page 19

USER ASSIGNABLE Section
Overview
This section is used to execute assigned functions. To
assign the desired function, edit it from "User Assignable
Settings" (page 23) in NUAGE FADER Setup.
Controls and Functions
[F1] – [F3]
1
Executes the assigned function. The button lights when
held down.
Lamp Description
Dim The function has been assigned.
Dark The function has not been assigned yet.
DAW SELECT Section
1
Overview
This section is for selecting the target DAW software for
operation. This section allows you to select the particular
DAW software when you have connected and configured
multiple DAW software programs. For details on
connecting and settings, refer to the NUAGE Workgroup
Manager manual
Controls and Functions
[DAW A] – [DAW C]
1
Selects the target DAW software for operation.
Lamp
Lit
Dim
Dark
[MAIN DISP]
2
Shows the Project Window in the secondary Mixer display,
as well as the main Nuage Master display. In order to use
this function, a KVM switch must be set up and the data to
be sent to the switch must be configured using NUAGE
Workgroup Manager.
Description of the Device
(page 24; PDF).
1
2
Description
The DAW software has been selected.
The DAW software has not been selected yet.
The DAW software has not been configured yet.
NUAGE FADER Operation Manual 19