Yamaha NUAGE MASTER Ncs500-CT Supplementary Manual
Hide thumbs
Also See for NUAGE MASTER Ncs500-CT:
- Supplementary manual (8 pages) ,
- Operation manual (36 pages)
Advertisement
Quick Links
NUAGE MASTER
NUAGE FADER
NUAGE I/O
V1.6 Supplementary Manual
This supplementary manual explains features and functions that have been added or changed in NUAGE
V1.6. Please read this manual together with other related NUAGE manuals.
Main changes
• Added support for Cubase Pro 8
• Updated Direct Monitoring window in Nuage I/O Setup
• Added stereo panner switching function
• Added more parameters to Channel Strip section
• Added support for switching parameters in Channel Setting mode
• Added key function (shortcut) for dividing events into selected ranges
• Added collective bypass function for inserts
• Added collective bypass function for dynamics
• Added support for switching between multiple Avid Pro Tools
• Added support for remote operation of the RMio64-D
• Changed display on the Marker Jump pop-up window into the list display
• Added a function for Project cursor positioning
• Added enable/disable selection for [Jog wheel] during project playback
CONTROL SURFACE
Ncs 500 - CT
CONTROL SURFACE
Ncs 500 - FD
AUDIO INTERFACE
Nio 500 - D16/A16/A8D8
(Nuage Master, Nuage Fader)
(Nuage I/O)
(Nuage Fader)
(Nuage Fader)
(Nuage Fader)
(Nuage Master)
(Nuage Fader)
(Nuage Master)
(NUAGE Workgroup Manager)
(NUAGE Workgroup Manager)
(Nuage Master)
(Nuage Master)
(Nuage Master)
page 2
page 4
page 4
page 5
page 5
page 5
page 6
page 6
page 6
page 7
page 8
page 8
page 9
EN
Advertisement
Related Manuals for Yamaha NUAGE MASTER Ncs500-CT
Summary of Contents for Yamaha NUAGE MASTER Ncs500-CT
- Page 1 NUAGE MASTER CONTROL SURFACE Ncs 500 - CT NUAGE FADER CONTROL SURFACE Ncs 500 - FD AUDIO INTERFACE NUAGE I/O Nio 500 - D16/A16/A8D8 V1.6 Supplementary Manual This supplementary manual explains features and functions that have been added or changed in NUAGE V1.6.
-
Page 2: Plug-In Manager
Added Support for Cubase Pro 8 (Nuage Master, Nuage Fader) Cubase Pro 8 is now supported. The following new functions are also supported. VCA Fader You can show/hide the VCA Fader with [OTHERS] in the CHANNEL VIEW CONTROL section. DeEsser You can now adjust the DeEsser parameters with Nuage Fader and Nuage Master. - Page 3 Channel Strip Recording MIDI Events to the Tracks You can adjust the following parameters on the INSERT page of Nuage Master CHANNEL CONTROL. MIDI/Audio (Only for Instrument Tracks) Switches the type of plug-in. To record the MIDI events, Channel Setting Mode select “MIDI.”...
-
Page 4: Nuage I/O Setup
Updated Direct Monitoring Added Stereo Panner Switching Window in Nuage I/O Setup Function (Nuage Fader) (Nuage I/O) You can now switch between the types of stereo panners in Nuage Fader. The connection destinations for output buses that are the targets of direct monitoring are now displayed in the Operation Direct Monitoring window in NUAGE I/O Setup. - Page 5 Added More Parameters to Added Support for Switching Channel Strip Section Parameters in Channel Setting (Nuage Fader) Mode (Nuage Fader) You can now adjust HC SLOPE, LC SLOPE, GAIN, You can now switch sub-parameters in the Channel φ (PHASE), HA HPF, and HA +48V in the channel strip. Setting mode to make adjustments to parameters.
- Page 6 Added Collective Bypass Added Collective Bypass Function for Inserts Function for Dynamics (Nuage Fader) (Nuage Master) You can now turn bypass on/off for “Inserts” on the You can now turn bypass on/off for “Dynamics” on the selected channels. selected channels. Operation Operation 1.
- Page 7 Added Support for RMio64-D Output Clock Source Enables you to select the MADI output signal when SRC is (NUAGE Workgroup Manager) on as the word clock source. Same as Input Syncs the MADI output signal with the You can now control the RMio64-D Dante/MADI Clock Source MADI input signal.
- Page 8 Changed Display on the Added a Function for Project Marker Jump Pop-Up Window Cursor Positioning into the List Display (Nuage Master) (Nuage Master) You can now enter values in units of hours, minutes, and seconds to position the “Project Cursor” on the The pop-up display for the Marker Jump function and TRANSPORT page.
- Page 9 Added Enable/Disable Selection for [Jog wheel] during Project Playback (Nuage Master) You can now disable [Jog wheel] operation during Project playback. Doing so will prevent unintended operation of the Project cursor during playback. Settings Switch the setting by using the “JOG Operation during Playback”...
- Page 10 Yamaha Pro Audio global web site: http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ Manual Development Department © 2014 Yamaha Corporation 412MW-A0...