Yamaha NUAGE FADER Ncs500-FD Operation Manual page 20

UNIT LINK Section
Overview
This section is for turning on and off UNIT LINK. When you
connect multiple Nuage Fader units (up to a maximum of
three) and turn on UNIT LINK, the connected Nuage
Fader units operate in synchronization. When you turn off
UNIT LINK, the unit operates independently.
Controls and Functions
[UNIT LINK]
1
Turns UNIT LINK on (lit) and off (dim).
1
FLIP Section
Overview
This section is for operating the FLIP function. Turning on
FLIP [KNOB 1] or [KNOB 2] lets you use the [Fader]
(page 10) in the CHANNEL STRIP section to control the
parameters assigned to the [Multi function knobs]
(page 8). [KNOB 1] represents the upper sixteen [Multi
function knobs], and [KNOB 2] represents the lower
sixteen [Multi function knobs].
When pressing [KNOB 1]
It should be noted that certain parameters assignable to
[Multi function knobs] cannot be controlled using the
[Faders].
Controls and Functions
NUAGE FADER Operation Manual
Description of the Device
1
2
20