Yamaha NUAGE FADER Ncs500-FD Operation Manual page 28

[CUES] Not applicable.
[INSERT]
[DYN]
[EQ]
[Sub parameter 1] These buttons are used to select
sends A – E. The button indicator of
[Sub parameter 2]
the currently selected send lights
up.
[Sub parameter 3]
[Sub parameter 4]
[Sub parameter 5]
[Sub parameter 6] Not applicable.
[Sub parameter 7]
[Sub parameter 8]
AUTOMATION Section
[ON] Not applicable.
[LATCH]
[PREVIEW]
[PUNCH]
WORKSPACE Section
[WORKSPACE 1] This button is used to make the Mix
window the active window.
[WORKSPACE 2] This button is used to make the Edit
window the active window.
[WORKSPACE 3] This button is used to open and
close the Transport window. Its
indicator lights up while the
Transport window is open.
[WORKSPACE 4] Not applicable.
CONTROL ROOM Section
[DOWNMIX] These controllers are used to
operate the DAW A Nuendo.
[DIM]
[CONTROL ROOM LEVEL
knob]
[SOLO CLEAR]
[LISTEN]
[METER RESET]
[PHONES]
PAGE CONTROL Section
[PAGE]
[ESC]
[ENTER]
[]/[]/[]/[]
(up/left/down/right)
USER ASSIGNABLE Section
[F1] – [F3]
DAW SELECT Section
[DAW A] – [DAW C]
[MAIN DISP]
UNIT LINK Section
[UNIT LINK]
FLIP Section
[KNOB 1]
[KNOB 2]
MODIFIER Section
[SHIFT]
*1
[CTRL]
[ALT]
*1: Control Room functions normally control Nuendo as the main
DAW (i.e., DAW A). In order, therefore, to output Pro Tools audio
signals from the Nuage system, the Pro Tools audio interface's
outputs must be connected to the Nuage system audio
interface's inputs, and the appropriate input and output settings
must be made on Nuendo's VST Connections window (selected
from the Devices menu).
Appendix
Not applicable.
Not applicable.
These buttons perform the same
tasks as when working with
Nuendo.
Not applicable.
This knob switches Pro Tools to Flip
mode. When in this mode, the
knob's LED will be lit.
This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Option modifier key found on Mac
keyboards.
This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Shift modifier key found on Mac
keyboards.
This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Control modifier key found on Mac
keyboards.
This button is used in conjunction
with other buttons to modify function
operation. This corresponds to the
Command modifier key found on
Mac keyboards.
NUAGE FADER Operation Manual 28