Yamaha NUAGE FADER Ncs500-FD Operation Manual page 15

Controls and Functions
2
5
8
!
[Sub parameter 1] – [Sub parameter 8]
1
Selects the parameter type or slot of the controllable
parameters of the [Multi function knobs]
CHANNEL STRIP section.
Lamp Description
Lit The parameter type or slot has been selected.
Dim The parameter type or slot can be selected.
Dark The parameter type or slot cannot be selected.
[METER]
2
Selects the meter view in "Section."
Lamp Description
Lit The meter view is set to Graph (conventional).
Dim The meter view is set to Wave (waveforms of
audio events).
[] (down)
3
Selects the parameter type or slot of the controllable
parameters of the [Multi function knobs]
CHANNEL STRIP section one by one. The button lights
when held down.
Lamp Description
Dim The parameter type or slot can be selected.
Dark The parameter type or slot cannot be selected.
[] (up)
4
The same as [].
5
Changes the "Section" view to "QUICK." The controllable
parameters of the [Multi function knobs]
CHANNEL STRIP section change to "Quick Controls."
When the CHANNEL STRIP section is in the Channel
1
Settings mode, you can assign and lock parameters to the
[Multi function knobs]. To do this:
3
4
1.
6
7
9
)
@
2.
#
(page 8) in the
6
Changes the "Section" view to "PRE." The controllable
parameters of the [Multi function knobs]
CHANNEL STRIP section change to "FILTER."
7
Changes the "Section" view to "ROUTING." The
controllable parameters of the [Multi function knobs]
(page
"Direct Routings."
When you press the [Multi function knob], the pop-up
window for selecting the Direct Routings is shown. You
can select the parameter by turning the [Multi function
knob], and set the parameter by pressing the [Multi
function knob].
8
Changes the "Section" view to "PAN." The controllable
(page 8) in the
parameters of the [Multi function knobs]
CHANNEL STRIP section change to "Pan."
9
Changes the "Section" view to "SENDS." The controllable
parameters of the [Multi function knobs]
CHANNEL STRIP section change to "Sends."
When you press the [Multi function knob], the pop-up
window for selecting the routings of "Sends" is shown. You
can select the parameter by turning the [Multi function
knob], and set the parameter by pressing the [Multi
function knob].
[QUICK CTRL]
Move the mouse cursor to the desired
parameter to be assigned.
The parameter is temporary assigned to the [Multi
function knob] which is not parameter-locked.
NOTE
Only automatable parameters can be assigned.
Press [Multi function button B] of the [Multi
function knob] for which you want to lock
the parameter for Quick Control.
The parameter is locked.
To unlock the parameter, press [Multi function button
B] again.
[PRE]
[ROUTING]
8) in the CHANNEL STRIP section change to
[PAN]
[SENDS]
NUAGE FADER Operation Manual
Description of the Device
(page 8) in the
(page 8) in the
(page 8) in the
(page 8) in the
15