Installing The Cam1000 / Bsc01 - Dometic BSC01 Installation And Operating Manual

Installing the CAM1000 / BSC01

5.2 Display elements of the camera image
Symbol
A or B
6 Installing the CAM1000 / BSC01
See fig. 2 to fig. d
See fig. d
No. Description
1 20 pin connector to the monitor
2 6 pin connector to the MAN vehicle interface
3 2 pin connector to the buzzer
4 8 pin connector to the camera
8
Function
Active area
Reference line
Dynamic arrow indi-
cator
GPS
Warning sound
Operation mode
Description
The red field marks the detection range of the
CAM1000. It appears for about 3 seconds after the
ignition is switched on. It indicates the area where
the camera can detect an object. This field can be
used to adjust the camera so that its detection
range covers a certain area.
The reference line appears permanently. It shows
the line between active and inactive area. It should
preferably be positioned parallel to the right vehi-
cle contour.
The dynamic arrow indication starts at the
detected object and moves in the direction of
travel of the vehicle (from rear to front).
Green symbol:
– Optical display of objects
– Warning sound active
Yellow symbol: no GPS signal
– Optical display of objects
– Warning sound inactive
Red symbol: no object detection available
Blue symbol: comfort switching of the buzzer
– Optical display of objects
– Warning sound inactive
Indication of the selected operation mode
CAM1000 / BSC01
EN