Technical Description - Dometic BSC01 Installation And Operating Manual

CAM1000 / BSC01
• Strong shadows with a behavior similar to moving objects may generate a detection/indica-
tion.
This product is only suitable for the intended purpose and application in accordance with these
instructions.
This manual provides information that is necessary for proper installation and/or operation of the
product. Poor installation and/or improper operating or maintenance will result in unsatisfactory
performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the man-
ufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
5

Technical description

5.1 Function description
The camera image is evaluated via the control unit in the camera. Objects moving in the same
direction and faster as the vehicle are detected and marked on the monitor with a movement
arrow. The arrow moves with the detected object and serves as an optical signal. Optionally, an
acoustic warning signal can be added.
The system BVS7 1000 includes the M75LXAHD monitor, which is preferably mounted on the
right A-pillar and provides the driver with images of the situation next to the vehicle.
The CAM1000 / BSC01 camera has the following features:
• CMOS camera with moving object detection function
• Evaluation of the signal edge when the object enters the active area of the image
• Defined active (C) and inactive (D) image area (fig. 5)
• Minimization of messages by exclusion of irrelevant objects (filtering by direction of movement)
• Optical signaling by dynamic arrow indicator
• Acoustic warning signal
• Speed-dependent activation via GPS receiver
• Automatic activation of the monitor
EN
Technical description
7