Removing The Seat; Mounting The Seat - KTM F8101S5 Owner's Manual

11.20

Removing the seat

11.21

Mounting the seat

–
Position left frame protector.
–
Insert right frame protector from below and push to the rear.
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screw
Guideline
F01581-11
Screw, frame protec-
tor
–
Mount the new cable ties.
Finishing work
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
–
Remove screw
F01533-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
H02218-11
SERVICE WORK ON THE CHASSIS 11
8
with the washers.
M5 3 Nm (2.2 lbf ft)
9
.
M5 3 Nm (2.2 lbf ft)
1
.
p. 88)
p. 50)
63