16 TUNING THE ENGINE
16.1
16.2
108
Checking the play in the throttle cable
400192-11
Adjusting the play in the throttle cable
Info
If the correct routing of the throttle cables has already been secured, the fuel tank does not need to be
removed.
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
A
throttle cable
.
Throttle cable play
»
If the throttle cable play does not meet the specified value:
–
Adjust the play in the throttle cable.
–
Push the cold start button in all the way.
When the throttle grip is turned forward, the cold start but-
ton returns to its original position.
»
If the cold start button does not return to its original posi-
tion:
–
Adjust the play in the throttle cable.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and let it run idle. Move the handlebar to and
fro over the entire steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the play in the throttle cable.
Preparatory work
–
Remove the seat. (
p. 63)
–
Remove the fuel tank.
–
Check the throttle cable routing. (
3 ... 5 mm (0.12 ... 0.2 in)
(
p. 108)
(
p. 108)
(
p. 108)
(
p. 69)
p. 78)