11 SERVICE WORK ON THE CHASSIS
11.5
11.6
11.7
52
Removing the fork protector
S01208-10
Installing the fork protector
S01208-11
Removing the fork legs
K01014-10
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the left fork protector.
–
3
Remove screws
and take off the right fork protector.
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws
.
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang tension-free to
the side.
Info
Do not pull the hand brake lever when the front wheel
is removed.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 50)
(
p. 94)