KTM F8101S5 Owner's Manual page 127

Faults
Malfunction indicator lamp
lights up or flashes
High oil consumption
Battery discharged
Possible cause
Defect in the fuel injection sys-
tem
Engine vent hose bent
Engine oil level too high
Engine oil too thin (low viscos-
ity)
Piston or cylinder worn
Battery is not charging
Unwanted power consumer
TROUBLESHOOTING 20
Action
–
Check the cabling for damage and the
electrical plug-in connections for corro-
sion and damage.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
–
Change the engine oil and oil filter,
clean the oil screen. (
–
Measure the piston/cylinder mounting
clearance.
–
Check the charging voltage.
–
Check the stator winding of the alter-
nator.
–
Check the open-circuit current.
p. 116)
p. 116)
125