10 TUNING THE CHASSIS
10.15
10.16
48
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
M01100-10
Handlebar position
H01188-10
–
1
Remove protection cap
–
2
Turn adjusting screw
Info
2
Adjusting screw
right fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping (SX‑F EU)
Comfort
Standard
Sport
Rebound damping (SX‑F US)
Comfort
Standard
Sport
Rebound damping (XC‑F US)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
–
1
Mount protection cap
The holes on the handlebar supports are placed at a distance
A
of
from the center.
Hole distance A
3.5 mm (0.138 in)
The handlebar can be mounted in 2 different positions. In this
way, the handlebar can be mounted in the most comfortable posi-
tion for the rider.
.
clockwise all the way.
is located at the lower end of the
17 clicks
12 clicks
7 clicks
20 clicks
15 clicks
10 clicks
17 clicks
12 clicks
7 clicks
.