7 7 .5.3
Remove the upper baffle
1.
2.
3.
4.
5.
7.6
Place the baffles
Do all procedures of
1.
2.
3.
4.
Falcon 80/56
With 2 hands, hold the upper baffle
at the back side.
Turn the front of the upper baffle up
until it is in a vertical position.
Move the left side of the upper baffle
to the left.
Move the right side of the upper
baffle over the support.
Lower the right side of the upper
baffle and remove it from the
appliance.
7.5
in reverse order.
Place the upper baffle. Make sure the steel rim points backwards after placement.
Place the ceramic supports.
Place the lower baffle.
Place the heat shield and screw the socket screw against the heat shield and tighten
with the nut.
Annual maintenance
27