barbas Falcon 80/56 Installation And Maintenance Manual page 23

C
D
E
Table 7: Installation against a combustible ceiling
A
B
C
D
E
Falcon 80/56
I I tem Description
Insulation plate Plate of non-combustible material with a thickness of at least 100
mm and a thermal conductivity of at least 0.10 W/m.K
Air gap Space between insulation plate and wall. Width of air gap at least 20
mm
Wall Existing side and/or rear wall made of combustible material or load-
bearing wall
Caution:
• Put a non-combustible insulating plate with a thickness of at least 40 mm
and a thermal conductivity of not more than 0.10 W/m.K on a distance of at
least 50 mm from a combustible ceiling.
Item Description
Appliance
Ventilation air outlet Outlet of heated air from the chimney breast
Insulation plate Plate of non-combustible material with a thickness of at least 40 mm
and a thermal conductivity of at least 0.10 W/m.K
Air gap Space between insulation plate and wall. Width of air gap at least 50
mm
Ceiling Existing ceiling made of combustible material
Caution:
• Make sure that brickwork is build with a clearing of at least 3 mm between
the sides and top of the appliance and the brickwork. The appliance can
expand during operation due to heating.
Installation
23