Table of Contents
Advertisement
Annual maintenance
7 7 .5
Removal of the baffles
To prepare for the chimney sweep, do all the procedures in this section.
7.5.1
Remove the heat shield
1.
2.
3.
7.5.2
Remove the lower baffle
1.
2.
3.
26
Loosen the nut above the heat shield
with a 3 mm hexagonal key and a 10
mm fork spanner. Unscrew the
socket screw. Make sure the nut
stays attached to the socket screw
Push up (1) the front of the heat
shield and pull it forward (2) and
move downward to a vertical position
(3).
Remove the heat shield from the
appliance.
Push up the left side of the lower
baffle (1) and move it to the left as far
as possible (2).
Lower the right side of the lower
baffle (3) and remove it from the
appliance.
Remove the ceramic supports on the
left and right side.
Falcon 80/56
Advertisement
Table of Contents
