Connect The Flue Gas Pipe; Connect The External Combustion Air Supply Pipe - barbas Falcon 80/56 Installation And Maintenance Manual

Table of Contents

Advertisement

A A ligning with adjustable height frame
1.
2.
3.
6.3.3

Connect the flue gas pipe

The appliance can be connected to steel pipes, double-walled insulated stainless steel
flues and flexible stainless steel flues with an outside diameter of 200 mm.
If the appliance is installed on an unlined, masonry flue with a large diameter, consider
using a flue lining system to improve the performance of the appliance.
1.
2.
3.
4.
5.
6.
6.3.4

Connect the external combustion air supply pipe

Falcon 80/56
Set the frames to the required height.
Use a 10 mm socket spanner for the
4 screws.
Caution:
Make sure each frame is attached with all 4 screws.
Adjust the adjustable feet. Use a 13 mm fork spanner.
Make sure that the appliance is installed horizontally. Use a spirit level.
Caution:
During operation of the appliance the outer side of the flue system
becomes hot. Refer to the installation instructions of the flue system for
safe installation. Follow these instructions with regard to safe distances to
combustible material.
Connect the flue to the flue gas connection on the appliance. If necessary use a steel
flue adaptor.
If a flexible stainless steel flue is used, secure the flue connection with 2 clamps.
If the flue is connected to an existing (masonry) chimney, make sure that the gap
between the flue and the existing chimney is sealed, with ceramic wool or any other
applicable component (ask your flue system supplier for advice)
Make sure that all mechanical connections of the flue system are correctly used.
Make sure that all of the flue system is gas-tight,
Insulate any non-insulated pipes with ceramic insulation wool. Refer to
material requirements.
Warning:
Only when the optional convection ventilator / combustion air box or the
combustion air inlet box is used: make sure to remove one of the break out
plates in the combustion air inlet of the box . If you do not obey to do this,
there is a risk of a dangerous situation when firing the appliance.
Installation
6.3.6
for the
19

Advertisement

Table of Contents
loading

Table of Contents