Installation Examples - barbas Falcon 80/56 Installation And Maintenance Manual

Description
• The appliance can be installed with a combustion air inlet box to connect a flexible
aluminum pipe for the external combustion air supply.
• The appliance can be installed with a combined convection ventilator / combustio air
inlet box to connect a flexible aluminum pipe for the external combustion air supply
and to connect a flexible aluminum pipe for the supply of convection air.
• The appliance can be installed with a convection set. The convection set collects the
heated convection air from the appliance and releases this air into the room. A
convection ventilator / combustion air inlet box is needed for the convection system.
• The combustion air can be provided from the installation room or from external.
• The appliance can be installed with 2 height adjustable frames. With these frames the
appliance can be installed higher from the ground level.
4.4

Installation examples

Installation with combustion air supply from the installation room, without convection
package
A
B
12
N N ote:
The appliance is a room-sealed appliance when combustion air comes
from the outer side of the building through a flexible pipe that is connected
to the combustion air inlet of the appliance. In all other cases the appliance
is not a room-sealed appliance and the data for leak tightness as given in
8
are not valid.
Note:
The illustrations shown in this paragraph are typical installation examples.
Item Description
Combustion air inlet Provides the appliance with combustion air.
Ventilation air inlet Provides the chimney breast with air.
Falcon 80/56