Table of Contents
Advertisement
Installation
6 6 .3.1
Install the appliance
1.
2.
3.
4.
6.3.2
Horizontally align the appliance
Aligning with adjustable feet
1.
2.
18
Caution: If the appliance is installed against a flammable rear and/or side wall,
precautions must be taken to prevent accidental fire. Refer to
description of suitable precautions.
Install the carrying tubes together with the bracket on the appliance or put the
carrying tubes in the optional adjustable height frames. You can use the carrying
tubes to move the appliance.
Install the appliance. Make sure the distance between the appliance and rear wall is
approximately 10 cm minimum.
Remove the carrying tubes and - if applicable - the bracket.
6.3.7
Refer to
for measures to be taken when installed against a flammable rear
and/or side wall.
Adjust the adjustable feet. Use a 13
mm fork spanner.
Make sure that the appliance is
installed horizontally. Use a spirit
level.
6.3.7
for a
Falcon 80/56
Advertisement
Table of Contents
