Fortinet FortiFone FON-460i User Manual page 69

• TFTP Server Address: Enter the IP address or FQDN of the TFTP server where configuration
and firmware files are located. Select the Received by DHCP on boot checkbox if the phone
will use DHCP option 66 or 150 to populate this field.
• HTTPS URL: is the URL of the HTTP/HTTPS server where configuration and software files
are located. Select the Received by DHCP on boot checkbox if the phone will use the DHCP
Option defined to retrieve the URL. If the option is present, the provisioning type is changed
automatically to HTTP/HTTPS using the URL from the DHCP option and default option 160.
Note: Port 80 is used for HTTP and 443 for HTTPS.
• ID: If required, enter the user name for HTTPS authentication.
• Password: If required, enter the password for HTTPS authentication
• MAC Cfg. Format: Define the format of the MAC (phone specific) configuration filename.
$MAC is replaced with the MAC address of the phone and must be included as part of the
file name or path to the configuration file on the HTTP/HTTPS server.
• Verifying Cert.: Enables the verification of the Certificate of Authority (CA) on the HTTPS
server. When enabled, the phone checks the CA signature. When Server name verification is
checked, the phone checks whether the name of the server sending the CA is valid. When
Expiration is checked, the phone checks the certification expiration date.
• Root CA: Defines a Certificate of Authority (CA) other than the internal CAs, which include
Verisign®, to use for verifying the CA from the server. When the CA is not available in the
phone memory, paste the Root CA in this area of web page.
• File to Upgrade: Select the S/W checkbox if the phone should check for new firmware files
on bootup. Select the Configuration checkbox if the phone should check and download
during bootup. We recommend you leave both enabled. If no new files are found, no
changes are made.
• Decryption Key: If required, enter the hexadecimal key required to decrypt configuration
files.
• Smart Upgrade: Enables periodic checks for new software on the provisioning server. Two
methods of smart upgrade are available; one checks the server at the interval in hours, the
second checks daily at the time specified in a 24-hour clock format. Select enable from the
Use Smart Upgrade drop-down menu, then select the method with the radial button and
enter the interval or time as appropriate.
If the phone finds a new version of software during the smart upgrade, the phone either
downloads the file or displays the availability of the new version and awaits confirmation to
download. To await confirmation, select the If discovered, confirm downloading checkbox.
To modify the configuration:
• Select the parameter and enter the new value or select the checkbox.
• When complete, press the Save button.
If the Received by DHCP on boot box is checked and there is an address specified for TFTP or
HTTPS, then it is ignored since the server information retrieved from the DHCP server is used.
Changes made to the Upgrade section require a reboot of the phone.
Using Web Manager for Configuration Page 62 FortiFone User Guide