List Of Parameter Nos - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.6

List of Parameter Nos.

If there is an error in the parameter settings and the parameter No. is displayed, the corresponding parameter can be
identified.
It is displayed in "Detailed information" in the [Error Information] tab in the "Module Diagnostics" window of the Motion module.
( Page 144 Error Information)
Item
System Parameter
Required Settings
4 TROUBLESHOOTING
198
4.6 List of Parameter Nos.
Inter-module Select Inter-module Synchronization Target Module
Synchronization Setting
Fixed Scan Interval Setting of Inter-module Synchronization
Station Type
Network No.
Station No./IP Address Station No.
Setting
IP Address
Station Type
Network No.
Station No.
IP Address
Subnet Mask
Default Gateway
Parameter No.
0101H
0101H
7100H, 7700H
7100H
7100H
A012H
A012H
A013H