Power Requirement; Physical Characteristics - National Instruments Compact FieldPoint cFP-1808 Quick Start Manual

Parity .......................................... None
Flow control ............................... None

Power Requirement

Power supply range........................... 11–30 VDC
Recommended power supply............ 20 W
Power consumption .......................... 6.1 W + 1.1(I/O module power
Safety Isolation Voltage
Isolation voltage is verified by a dielectric withstand test.
Module to backplane
Continuous ................................. 250 V
Withstand.................................... 2,300 V

Physical Characteristics

Screw-terminal wiring ...................... 14–22 AWG copper conductor wire with
Torque for screw terminals ............... 0.5–0.6 N · m (4.4 –5.3 lb · in.)
Weight............................................... 278 g (9.8 oz)
cFP-1808 Quick Start Guide
requirements)
, Measurement Category II
rms
, 5 s max
rms
7 mm (0.28 in.) of insulation stripped from
the end
20 ni.com