SATO e Series Service Manual page 65

LCD Panel — Download Mode
STEP
1. Record all current dip switch positions, then place all switches in the
OFF or down position.
2. Place the DSW2-6 in the ON or up position.
3. Turn ON the power switch. The following screens will appear.
Waiting for downloading
of program/font data from
the computer.
Display current download
mode in X.
Download completed.
Display the error content
in XXXX
Press the ENTER key to return to the original selection screen.
PROCEDURE
SATO M-10e TT/DT Printers Service Manual
flash download
ready
xxxxxxx download
downloading
xxxxxxx download
completed
download error
xxxxxxx error
Section 2. Configuration
PN 9001098
Rev. A
2-41