SATO e Series Service Manual page 10

Section 1. Overview and Specifications
Components
Media Width
Adjust
Thumbscrews
POWER SWITCH
CONFIGURATION
OPERATOR
INTERFACE
CARD SLOT
EXT PORT
CONNECTOR
PCMCIA
CARD SLOT
AC INPUT
CONNECTOR
PN 9001098
Rev. A
1-4
BACK OF PRINTER
Media Loaded
LED
To turn power On or Off
Potentiometers and DIP switches to configure the
PANEL printer and make setup adjustments.
To set up the various configurations and to display
PANEL dispensing quantity and the various alarms.
Slot to plug in an interface adapter. An adapter
must be connected before the printer is
operational. The adapter types available are:
• RS232C Serial I/F Module, DB-25
• IEEE1284 Parallel I/F Module, AMP 57-40360
• Universal Serial Bus I/F Module
• Ethernet 10/100 BaseT I/F Module
• RS-422/485 I/F Module, DB-9
External signal connector, external control of print
cycle.
One slot for optional PCMCIA Cards
Input 115V, 50/60 Hz connector. Use power cable
provided.
SATO M-10e TT/DT Printers Service Manual
AC Input
Connector
Configuration
Panel
Interface
Card Slot
EXT Port
Connector
PCMCIA
Card Slot