Table of Contents
Advertisement
48
Finalizing the Installation
Ember Installation
:
NOTE
The embers are included with the fireplace. Consult the installation manual for details on
installing the embers. If using the ember bed light, the embers are installed with the ember bed
light glass.
Embers are provided to further enhance the firebox. Place the embers on the firebox floor and on the
burner. Do not place embers over any of the burner holes or air channels.
Rock Wool Placement
:
NOTE
The rock wool is included with the fireplace. Consult the installation manual for details on
installing the rock wool.
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the rock
wool is to brush it on to the burner. Compress a clump of rock wool between your thumb and forefinger.
Use a stiff brush to apply a thin layer of rock wool fibers onto the burner. Do not use the entire bag of rock
wool. Use only a small amount and save the remainder. Over-use of rock wool will diminish the glow and
may cause sooting or other adverse conditions.
© Travis Industries
(for qualified installers only)
6/28/2019 - 1499
864 40K CF Install Aust
Advertisement
Table of Contents
