Ember Light Bulb Replacement - Lopi 864 CF 40K GSR2 Owner's Manual

Ember Light Bulb Replacement

The accent lights in your fireplace provide additional lighting. The bulbs will burn out over time. Replace
the halogen bulbs with the following bulbs:
To replace, follow the directions below:

Shut off gas to the fireplace and let it cool for 15 minutes.

Remove the barrier screen and glass assembly (see page 19).

Remove the media tray skirt.

Locate the burned out bulb and remove it from the socket by pulling the bulb directly away from
socket (do not twist).

Gently insert the pins on the replacement bulb into the holes on the socket.
(NOTE: .Take care to not touch the replacement bulbs with your fingers – use foam packing or paper towel to
hold the bulb)

Return the fireplace to its correct configuration.
© Travis Industries
Maintenance
35 Watt 240 Volt T4 Halogen Bulb (GY6.35 Base)
2/6/2019 - 1485
23
864 GSR2 Op Man