Sample Measurement; Measuring Samples Manually; Measuring Samples With Sips - Agilent Technologies 55B AA User Manual

Operation

Sample Measurement

Samples are measured on the Results page. You can measure samples
manually, or use SIPS to facilitate online dilution of overrange
samples.

Measuring Samples Manually

To measure samples manually:
1
2
3
4

Measuring Samples with SIPS

You can use SIPS 10 to perform automatic dilution of overrange
samples.
To measure samples using SIPS 10:
1
2
3
4
5
6
If the sample is overrange, SIPS automatically dilutes the sample
online and measurement continues. The dilution factor used is given
on the Results page and the final dilution-corrected concentration is
reported.
92
Set the Measurement Parameters as described on Page 79.
Press the Results key.
Aspirate the appropriate sample (the sample highlighted on the
Results page) and press the Read key.
Repeat the previous step for the remaining samples.
Set up the SIPS 10 as described in the SIPS manual.
Enable SIPS on the Options page, and set the parameters as
required (see Page 66).
Set the remaining Measurement Parameters as described in Page
79.
Press the Results key.
Ensure the diluent tubing is connected to the Mariott vessel.
Place the pump tubing in the appropriate sample and press the
Read key.
Agilent 55B AA Spectrometer User's Guide