Technical Data - Graco Gusmer Reactor H-25 Operation

Technical Data

Category
Maximum Fluid Working Pressure
Fluid:Oil Pressure Ratio
Fluid Inlets
Fluid Outlets
Fluid Circulation Ports
Maximum Fluid Temperature
Maximum Output (10 weight oil at
ambient temperature)
Output per Cycle (A and B)
Line Voltage Requirement
Amperage Requirement
Heater Power
(A and B heaters total, no hose)
Hydraulic reservoir capacity
Recommended hydraulic fluid
Sound power, per ISO 9614-2
Sound pressure, 1 m from equipment
Weight
Wetted Parts
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
311299C
Data
Model H-25: 2000 psi (13.8 MPa, 138 bar)
Model H-XP2: 3500 psi (24.1 MPa, 241 bar)
Model H-25: 1.91:1
Model H-XP2: 2.79:1
Component A (ISO): 3/4 npt(f), 250 psi (1.75 MPa, 17.5 bar) maximum
Component B (RES): 1/2 npt(f), 250 psi (1.75 MPa, 17.5 bar) maximum
Component A (ISO): #8 JIC (3/4-16 unf), with #5 JIC adapter
Component B (RES): #10 JIC (7/8-14 unf), with #6 JIC adapter
1/4 npsm(m), with plastic tubing, 250 psi (1.75 MPa, 17.5 bar) maximum
190°F (88°C)
Model H-25: 22 lb/min (10 kg/min) at 35 cycles/min (60 Hz)
Model H-XP2: 1.5 gpm (5.7 liter/min) at 35 cycles/min (60 Hz)
Model H-25: 0.063 gal. (0.23 liter)
Model H-XP2: 0.042 gal. (0.16 liter)
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz
380V 3 phase units: 338-457 Vac, 50/60 Hz
See tables, page 3.
See tables, page 3.
1.2 gal. (4.5 liters)
Citgo A/W Hydraulic Oil, ISO Grade 46
87.8 dB(A)
80.2 dB(A)
Units with 8 kW Heaters: 498 lb (226 kg)
Units with 15.3 kW Heaters: 525 lb (238 kg)
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome,
fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically
resistant o-rings
Technical Data
37