Spraying - Graco Gusmer Reactor H-25 Operation

Spraying

1.
Engage gun piston safety lock.
2.
Close gun fluid manifold valves A and B.
3.
Attach gun fluid manifold. Connect gun air line.
Open air line valve.
26
4.
Set PRESSURE RELIEF/SPRAY valves (SA,
SB) to SPRAY.
ti2409a
5.
Check that heat zones are on and temperatures
are on target, page 23.
6.
Press motor
ti2728a
ti2543a
SA
SB
to start motor and pumps.
Spraying
ti7739a
311299C