Side Control And Indicators - Sanyo PLC-HP7000L Owner's Manual

Part Names and Functions
Side Control
①
②
③
④
⑤
① ON/STAND-By button
Turn the projector on or off (pp.23–24).
② INPUT button
Select an input source (pp.32–34).
③ MENU button
Open or close the On-Screen Menu (p.25).
④ Point ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.44).
⑤ SHUTTER button
Close and open up the built-in shutter. (p. 27 )
⑥ SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.44).
⑦ LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
12

Side Control and Indicators

⑦
⑥
⑧ POWER indicator
⑨ LAMP/ SHUTTER indicator
⑩ LAMP REPLACE indicator
⑪ WARNING FILTER indicator
⑫ WARNING TEMP . indicator
Indicators (on the top panel)
– Light when in stand-by mode and during
operations.
– Blink in the Power management mode (p.63).
Light red during operations.
Light blue when the shutter is closed (p. 85 ).
Light orange when the projection lamp reaches
its end of life (pp.74, 84).
– Blink slow when the filter is being scrolled (pp.
71, 85).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.71, 87).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time
set in the timer setting, urging immediate filter/
filter cartridge replacement (pp.70, 71, 87).
Blink red when the internal temperature of the
projector exceeds the operating range (pp.77,
85-87).
⑧
⑨
⑩
⑪
⑫