Advanced Color Matching; Test Pattern - Sanyo PLC-HP7000L Owner's Manual

Setting

Advanced color matching

Measured Information .... When selecting Measured
Advanced color matching .... Press the POINT ▲▼ buttons to
Measured .............. Displays the measured values of Red,
Target .................... Adjusts the chromatic coordinate
Auto test pattern .... Select On to display a suitable pattern
Menu off ................. Close the menu temporarily.
Factory default ...... Select Factory default and press
Reset ...................... Select Reset and press the SELECT
Store ...................... Select Store and press the SELECT
Test pattern ........... Displays the Test pattern menu.
Back ....................... Cancels the Advanced color
HDMI setup
Select Normal or Enhanced according to the output signal
of video equipment. Press the Point ▲▼ buttons to switch
between each option.
Normal ........ When the output of video equipment is set
to "STANDARD."
Enhanced .... When the output of video equipment is set
to "ENHANCED."
60
Information, the window shown
right appears. Current image level is
shown. To go back to the Advanced
color matting window, press any key.
switch between On and Off. Selecting
On displays the values which link to
the Color Match values.
Green, and Blue.
(X,Y) and the gain value (g) of Red,
Green, Blue, Cyan, Magenta, Yellow,
and White. Use the Point ▲▼
buttons to move the red frame pointer
to an item of which you want to adjust
the value and then press the SELECT
button. Use the Point ▲▼ buttons
to adjust the value. To move to the
next digit, use the Point ▲▼ buttons.
Press the SELECT button to set the
value.
when setting items.
the SELECT button. Then Return to
factory default of Color matching?
message appears. To reset the
selected Measured value and
Target value, select yes. Then, the
confirmation box appears. Press the
SELECT button at yes again.
button. Then the confirmation
message appears. Press the
SELECT button at yes. to reset to the
previously stored values.
button. Then the Confirmation box
appears. To store adjusted data,
select yes.
matching menu display.
Measured information
Advanced color matching

Test pattern

Note:
• The names for the output setting of
video equipment vary from equipment
to equipment. For details, refer to the
manual of video equipment.