Remote Control - Sanyo PLC-HP7000L Owner's Manual

① STAND-By button
Turn the projector off (p.24).
② SIGNAL EMISSION indicator
Light red while a signal is being sent from the
remote control to the projector.
③ ON button
Turn the projector on (p.23).
④ SHUTTER button
Close and open up the built-in shutter (pp.27,
28 ).
⑤ MENU button
Open or close the On-Screen Menu (p.25).
⑥ POINT ▲▼◄► buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.44).
⑦ L-CLICK button
Act as the left mouse button for wireless mouse
operation (p.31).

Remote Control

②
③
④
⑤
⑥
⑦
⑧ R-CLICK button
⑨ SELECT button
⑩ MOUSE POINTER button
⑪ AUTO PC button
⑫ INPUT button
– Do not bend, drop, or expose the remote control
– For cleaning, use a soft dry cloth. Do not apply
Part Names and Functions
①
⑫
⑪
⑩
⑨
⑧
Act as the right mouse button for wireless
mouse operation (p.31).
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.44).
Move a pointer of the projector or a pointer for
wireless mouse operation (p.31).
Automatically adjust the computer image to its
optimum setting (pp.28, 36).
Select a signal (pp.32-34).
To ensure safe operation, observe the
following precautions:
to moisture or heat.
benzene, thinner, spray, or any other chemical
materials.
13