Mode Free - Sanyo PLC-HP7000L Owner's Manual

Computer Input
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select yes. All adjustments will return to their previous
figures.

Mode free

To clear the stored data, select Mode free and then press
the Point ► or the SELECT button. Move the highlight
to the Mode that you want to clear and then press the
SELECT button.
Store
To store the adjusted data, select Store and then press the
Point ► or the SELECT button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.
Note:
• D isplay area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, 1080i or 1080p is
selected in the PC System Menu (p.35).
• W hen input computer signal to the projector, PC
adjust function will become available.
38
Mode free
This mode has stored
parameters.
Values of Total dots,
Position H, Position V,
Display area H and
Display area V.
Store
Press the MENU Press the SELECT
button to close button to store the
this dialog box. data.
Press the
SELECT button
to clear the
stored data.
Vacant