Computer Input Source Selection - Sanyo PLC-HP7000L Owner's Manual

Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired input
2
and then press the Point ► button to access the
submenu items.
Use the Point ▲▼ buttons to select the desired
3
source and then press the SELECT button.
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
RGB(PC analog)
When your computer is connected to the INPUT 1
(ANALOG) terminal, select RGB (PC analog).
Note:
Input source changes if the INPUT 1 button on the
remote control is pressed.
WHEN SELECTING INPUT 2 (5 BNC INPUT jACKS )
When connecting the computer output [5 BNC Type
(Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the
computer to G, B, R, H/HV, and V jacks:
RGB
When your computer is connected to the INPUT 2
(5 BNC INPUT JACKS) terminal, select RGB.

Computer Input Source Selection

Input Selection
INPUT MENU
INPUT 1 MENU
INPUT 2 MENU
33