Image Adjustment - Sanyo PLC-HP7000L Owner's Manual

Video Input
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
2 Use the Point ▲▼ buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Contrast
Press the Point ◄ button to decrease the contrast; press
the Point ► button to increase the contrast (from 0 to
63).
Brightness
Press the Point ◄ button to decrease the brightness;
press the Point ► button to increase the brightness
(from 0 to 63).
Color
Press the Point ◄ button to decrease the intensity of the
color; press the Point ► button to increase the intensity
of the color (from 0 to 63).
Tint
Press the Point ◄► buttons to adjust the tint value to
get a proper color balance (from 0 to 63).
Color management
Refer to pages 40 and 41.
Color temp .
Use the Point ◄► buttons to select the desired Color
temp. level (High, Mid, Low or XLow).
White balance (Red)
Press the Point ◄ button to lighten red tone; press the
Point ► button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten green tone; press
the Point ► button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point ◄ button to lighten blue tone; press
the Point ► button to deepen blue tone (from 0 to 63).
Note:
• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj..
• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.46).
48

Image Adjustment

Image adjust Menu
Selected Image mode
Use the Point ◄► buttons to
adjust the setting value.