Sanyo PLC-HP7000L Owner's Manual page 49

Offset (Red/Green/Blue)
Press the Point ◄ button to lighten red/green/blue tone
of the black level of an image; press the Point ► button
to deepen red/green/blue tone of the black level of an
image (from 0 to 63).
Auto picture control
Use the Point ◄► buttons to select the desired Auto
picture control option (Off, L1 or L2).
Off ............... Auto picture control OFF position.
L1 ................ Auto picture control LEVEL 1 position.
L2 ................ Auto picture control LEVEL 2 position.
Advanced color*
Use the Point ◄► buttons to select the advanced color
mode.
Off ............... Advanced color mode is Off.
Auto ............ Advanced color according to the type of
image.
* This function controls the operation of the Color Control
Devic, which independently and automatically regulates
the amount of yellow light passing through the LCD panel,
to accurately reproduce both image color and image
brightness. Normally leave Auto (default setting).
Note:
• White balance may change depending on the image.
Sharpness
Press the Point ◄ button to decrease the sharpness
of the image; press the Point ► button to increase the
sharpness of the image (from 0 to 31).
Gamma
Use the Point ◄► buttons to adjust the gamma value
to obtain a better balance of contrast (from 0 to 15).
Video Input
49