Side Control And Indicators - Sanyo PLC-XM100 Owner's Manual

Part Names and Functions
Side Control
ON/STAND-BY button
Turn the projector on or off (pp.23-24).
MENU button
Open or close the On-Screen Menu (p.25).
SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
SHUTTER button
Close and open up the built-in shutter. (p.27)
Point
– Select an item or adjust the value in the On-
Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
(p.28).
LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
INPUT button
Select an input source (pp.33-35).
POWER indicator
– Light green while the projector is in stand-by mode.
– Light green during operations.
– Blink green in the Power management mode (p.57).
12

Side Control and Indicators

( VOLUME – / + buttons
Indicators (on the top panel)
LAMP indicator
Light red during operations.
WARNING TEMP. indicator
Blink red when the internal temperature of the
projector exceeds the operating range (pp.69,
76-78).
WARNING FILTER indicator
– Blink slow when the filter is being scrolled
(pp.63, 76).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.63, 78).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time
set in the timer setting, urging immediate
filter/ filter cartridge replacement (pp.62, 63,
78).
SHUTTER indicator
Light blue when the shutter is closed (p.76).
LAMP REPLACE indicator
Light orange when the projection lamp reaches
its end of life (pp.66, 77).