Adjusting The Mounting Arm - Smart Technologies Sympodium MP250 Installation And User Manual

Adjusting the Mounting Arm

You can attach the interactive pen display to the cabinet with the adjustable mounting arm. While
you deliver your presentation, you can tilt the display so it's in a comfortable and glare-free
position. If you want to move the mounting arm, you can attach it in a different position on the
MP250-DT.
To tilt the interactive pen display
1. Take hold of the sides of the interactive pen display. Don't apply pressure to the screen.
2. Tilt the interactive pen display to the angle you require.
To move the mounting arm
CAUTION
The interactive pen display is heavy. Get an assistant to support the interactive pen
display when you are inserting or removing the screws that attach the interactive
pen display to the mounting arm.
CAUTION
Grip the interactive pen display on the sides or the back when you hold or move it.
Don't apply pressure to the screen.
1. Remove the screws that attach the interactive pen display to the mounting arm using the
TORX security key from the accessory kit.
Two of the four screws that
connect the mounting arm to
the interactive pen display
NOTE: For clarity, the
mounting arm and the
interactive pen display
are shown without the
counter top.
2. Place the interactive pen display face up on the counter top.
Addendum to the SMART Sympodium MP250 Interactive Lectern Installation and User's Guide 17