Using The Power Button To Identify The Display's Status; Adjusting Audio; Freezing The Screen - Smart Technologies SMART Board SBID-7075P User Manual

CHAPTER 2
USING THE DISPLAY
No. Name
1 Power
2 Volume increase
3 Volume
decrease
4
Freeze
5 USB Type A
connector (×2)
6 HDMI 2 input
connectors

Using the Power button to identify the display's status

The Power button indicates the display's status:
Power button
Off
Amber
White

Adjusting audio

If you're presenting content with sound, you can use the buttons on the convenience panel to
increase and decrease the volume.

Freezing the screen

You can temporarily freeze the screen by pressing the Freeze button on the convenience panel.
This is particularly useful when you want to pause a video, an animation or other moving content.
NOTE
Freezing the screen does not pause any applications running on the connected computer. It
simply freezes the display of those applications.
To unfreeze the screen, press the Freeze button again.
11 smarttech.com/kb/171163
Procedure
Press to enter or exit Standby mode.
l
Press and hold for four seconds to turn off the display.
l
Press and hold for 10 seconds to reset the display.
l
Press to increase the volume.
Press to decrease the volume.
Press to freeze and unfreeze the screen (see page 11).
Connect USB drives and other devices that you want to use
with the iQ appliance or a connected computer.
Connect a computer or other input source to use with the
display (see page 20).
Display status
Not receiving power
Standby mode
Normal operating mode