Table of Contents
Advertisement
6 Technical data
6.1 Medium
Working medium:
6.2 Temperature
Media temperature:
Sterilization temperature:
Ambient temperature:
Storage temperature:
6.3 Pressure
Operating pressure:
www.gemu-group.com
Corrosive, inert, gaseous and liquid media which have no negative impact on the physical and
chemical properties of the body and diaphragm material.
Without bypass
With bypass
Observe pressure/temperature diagram
Seat seal FKM without bypass, (code 4)
Seat seal PTFE without bypass, (code 5)
Seat seal FKM
bypass diaphragm material EPDM,
(code 43)
Seat seal FKM
bypass diaphragm material PTFE/EPDM,
PTFE laminated, (code 45)
Seat seal FKM
bypass diaphragm material EPDM,
(code 47)
Seat seal PTFE
bypass diaphragm material PTFE/EPDM,
PTFE laminated, (code 55)
1) The sterilization temperature is only valid for steam (saturated steam) or superheated water.
2) Longer sterilization times or continuous operation on request.
3) If the sterilization temperatures listed above are applied to the EPDM diaphragms for longer periods of time,
the service life of the diaphragms will be reduced. In these cases, maintenance cycles must be adapted ac-
cordingly. This also applies to PTFE diaphragms exposed to high temperature fluctuations. The mainten-
ance cycles must be adapted accordingly.
-10 — 60 °C
0 — 40 °C
0 — 10 bar
Pressure/Temperature diagram
11
10
9
8
7
6
5
4
3
2
1
-20 -10 0
20
-10 — 160 °C
-10 — 100 °C
160 °C
160 °C
150 °C
150 °C
150 °C
150 °C
40
60
80
100
120
Temperature [°C]
11 / 54
1)
, steam max. 30 min
2)
1)
, steam max. 30 min
2)
3)
, max. 30 min
3)
, max. 30 min
3)
, max. 30 min
3)
, max. 30 min
130
140
160
GEMÜ 567 BioStar control
6 Technical data
Advertisement
Table of Contents
