Peeler Command ．．．．．．．．．．．．．．．．．．．．．．35 - Oki OKIPOS X400 Programming Manual

Command Structure <ESC>CLa
a
Example: <ESC>CL1
Placement: Following the <ESC>Q Print Quality command.
Default:
Command Function To control the cutting of labels when using Peeler unit with the printer.
Input to Printer
<ESC>A
<ESC>H20<ESC>V20<ESC>WB1TEST LABEL
<ESC>Q3
<ESC>CL1
<ESC>Z
Special Notes 1.
You must have the optional printer Peeler installed to use this function. Contact
your OKI representative for more information.
2. Sending a Peeler Enable command to a printer without a Peeler installed will
halt the printer except you press the FEED button..
All manuals and user guides at all-guides.com
Peeler Command
= Peeler control
0 Disables Peeler.
1 Enables Peeler.
Peeler is disabled
35