Oki OKIPOS X400 Programming Manual page 54

Command Structure <ESC>Eaaa
aaa =
Example: <ESC>E010
Placement: Preceding the text that will use the line feed function.
Default:
Command Function To print multiple lines of the same character size without specifying a new
print position for each line. With the Line Feed command, specify the number
of dots you want between each line. Then, send an ASCII <CR> at the end of
each line of text. The printer automatically identifies the size of the last
character, moves down the number of dots specified, and begins printing the
next line.
Input to Printer
<ESC>A
<ESC>E010<ESC>H50<ESC>V50<ESC>L0202<ESC>S
THIS IS THE 1ST LINE
THIS IS THE 2ND LINE
THIS IS THE 3RD LINE
<ESC>Q1<ESC>Z
Printer Output
Special Notes 1.
It is effective only for the current data stream.
2. When printing lines or boxes in the same data stream with the Line Feed
command, the Lines and Boxes command should be specified last, preceding
<ESC>Q Quantity command.
3. This command is invalid only if the value specified is zero.
All manuals and user guides at all-guides.com
Line Feed
Number of dots (001 ~ 999) between the bottom of the characters
on one line to the top of the characters on the next line.
None
52